X
تبلیغات
رایتل
30 شهریور 1386 ساعت 09:46 ق.ظ

                              http://ads784.blogfa.com                                    مدارات الکترونیک جدید فارسی   

                        

 

Electronic Selector for 10 sources with Display-Relay Drive

Electronic_sel_10_D.gif (23418 bytes)

    .


     This is a circuit for alternative sources selection. It combines mechanical selection using a rotating switch S1, the electronic drive of the relays RL 1-10 and also the optical indication of the selection by the Display DSP1. The function is based on the connection of the mechanical selections into 4 Bit (BCD) code. It is managed by the proper polarization of the diodes D1-10 and simultaneous convention into decimal output by IC2 which is a BCD to decimal decoder. The monitor is driven by the IC1, which is a BCD to 7- segment Latch/ decoder/ driver. We can made a lot of combinations and selections on the circuit. For instance, we may add Led' s in parallel with the RL1-10.

Code BCD to decimal converter for CMOS

Part List

R1....4= 10Kohms C2= 47uF 25V Q1-10= BD679
R5....11= 820 ohms D1.....20= 1N4148 DSP1= Display 7 segment Common Cathode
R12....21= 15Kohms IC1= 4511 S1= 1X10 Step Selector
C1= 100nF 63V MKT IC2= 4028 RL1....10=  6V or 12V Relay
                                                          نظرات

                          بازگشت به صفحه اصلی

 

****************************************************************

         ////     وبلاگ در حال بروزرسانی و پیوست مدارات جدید میباشد  ////

                                 *****    برای بازدیدمجدد تاچند روز اینده دوباره مراجعه کنید  *****

****************************************************************

del.icio.us  digg  newsvine  furl  Y!  smarking  segnalo
>